|by Peter Kirst
Back to the manual start page
HTML Page / Server Upload / Dial In
HTML page generator:
Source file: Select a file that should be used as the source for the HTML page. The standard installation contains a sample HTML source, but you can modify it if you are familiar with HTML programming. You can use a number of Placeholders to specify the event.
Destination Name: Specify a name of the destination HTML file. Please don't add any path information. SupervisionCam will use the same path as the destination folder for the images.
Start upload when an image was saved: Enable this box if you want to copy the HTML page and the images to a server. The server can be a simple network destination computer or an ftp server. Please note: SupervisionCam does not support some kinds of proxy servers. Generally the default internet settings of the MS Internet Explorer are used.
Do not start more than one upload in x min: Use the select box to reduce the network traffic or online time.
Required Dial In connection: Enable this box if SupervisionCam should open a Dial In connection to a remote network before it starts the upload procedure. If the box is grayed your computer is not yet configured for a dial in connection or you have not installed MS Internet Explorer 5.0 or higher. Please be careful: If something is wrong with the file transfer the program stays connected. Use this function only if you are sure that your server works correctly.
Server Name: Enter the name of the destination server. It can be either something like \\Servername for a standard network server or ftp://ftp.server.com if a ftp connection is required. For an FTP connection a login name and a password is required.
Login Name: Enter your user name. This box is only required for an FTP upload .
Password: Enter your password. This box is only required for an FTP upload .
Test: Use the test button to check your configuration.
Dial In: (Only available if the file upload and required Dial In is enabled)
Connection: Select one of the Dial In connections you have configured on your computer.
User: Enter the user that is enabled for this connection.
Password: Enter the password that is enabled for this connection.
Domain: Optional. Enter the name of the domain you want to connect to.
Test Dial In:Use this button to check you configuration.