SupervisionCam by Peter Kirst
Homepage SupervisionCam

Back to the manual start page

Settings:

Activity Timing

Start this configuration with Windows: Enable this box if you want to start this profile each time Windows is started.

Date:

Day: Select this box and specify a day if you want to start the supervision on a special day. It is also possible to specify any day e.g. the next week. This configuration will start the supervision on the start day that time and will end on the end day and at end time.

Days of the week: Select this box and the days you wish to enable the supervision. The start and end time you configured in the next box will be used for each day.

Time: Specify the start and end time. If the Start time is higher than the stop time you configured an "overnight" surveillance. SupervisionCam will stop on the next day.

List box: All the listings are currently configured. Use the Add and Delete button to configure it.

The following configuration starts the surveillance every night during the week and will operate 24 hours during the weekend.

Date

Time

Mo, Tu, We, Th, Fr

18:00 - 06:00

Mo

00:00 - 06:00

Sa, So

00:00 - 24:00